CACEA | Canadian Association of Consulting Energy Advisors

EMBODIED CARBON & INSULATION - Lowering Emissions Now and in the Future
2026-06-05 12:00 - 13:00 (America/Toronto) | Virtual via Zoom, Canada
The Canadian construction industry is being tasked with building and retrofitting millions of homes to meet higher expectations for energy performance. And more immediate is the need for low and zero embodied carbon options for the materials we use for our built environment. Codes are changing. Climate is changing. Builders, renovators, and energy advisors have a challenging time in front of us as we head toward a zero energy, zero carbon future.
How do we get to a better performing, more resilient and low carbon housing infrastructure? What can we change about the way we do things? And what does this mean for EA’s of the future?
Join NAIMA Canada’s Gary Sharp and Andy Cockburn as they present ideas on how we might tackle embodied carbon AND operational carbon together by pushing for Tier 5 performance as soon as possible.
This event is open to CACEA members only at no charge. CEC = 1

CSA F280-12 DHL/DHG Analysis: Whole-House and Room-by-Room Approach Pilot Training – Session #2
2026-06-02 11:00 - 2026-06-03 17:00 (America/Toronto) | Virtual via Zoom, Canada
REAs CAN STEP INTO THE HEAT PUMP GAME!
REAs delivering the EnerGuide Rating System (ERS) and other HOT2000 modelers will gain the ability to perform precise room-by-room heat loss and heat gain calculations for use in both the retrofit and new construction contexts. Using verified software, EAs and other HOT2000 modelers can provide key inputs to the sizing of heating and cooling equipment primarily based on data collected during home energy evaluations, with minimal additional information to be collected.
Upon completing this course, EAs and other HOT2000 modellers will be able to offer this service to homeowners and contractors, providing essential calculations that HVAC professionals can use to size heat pumps accurately. Please note: This course does not cover air distribution design and does not enable EAs and other HOT2000 modellers to select specific heat pumps or make direct sizing recommendations.
Instructor and CACEA member Liam Butters, Owner of Ecology Consulting, will guide the group through the whole-house and room-by-room F280 processes. At the end of the course, participants will:

Understand why heat loss and gain calculations are needed for existing and new homes.
Understand important definitions and concepts used in heat loss and gain calculations.
Understand the whole‐house and room-by-room heat loss and gain calculation principles and content.
Recognize the similarities and differences between the data used for HOT2000 energy simulation and CSA F280 whole‐house and room-by-room heat loss and gain calculations.
Familiarize with verified software that can use HOT2000 inputs through a case study.

REGISTRATION
CRITERIA FOR REAs:

A “Full” category CACEA member OR a non-CACEA member REA who completed D&E files and modelled 15 homes onsite tested under an NRCan program (ERS, EnergyStar, R2000 or NetZero – D&E; P&N) which is SO validated OR put forward by CACEA Full Member in good standing.
NON-MEMBER REQUIREMENTS: $1 million Errors and Omissions Insurance and a signed SO confirmation letter (annually). (USE THIS LETTER) Must upload the proof of coverage and letter to the registration form.

CRITERIA FOR OTHER HOT2000 MODELLERS:

1 full year of HOT2000 modelling.
$1 million Errors and Omissions Insurance. Must upload the proof of coverage to the registration form.

ADDITIONAL COURSE INFORMATION:

Participants will work through a case study and complete an independent exercise using the Volta SNAP tool.
Use a full-size monitor, preferably two. Working primarily from an iPad or laptop monitor is not ideal).
Ensure good connectivity and use a headset or quality external mic to reduce feedback or echoes.
Printing of certain course materials in advance is recommended – details will be provided closer to the event.

REGISTRATION FEES
CACEA Members: $25.00 + tax
Non-members: $25.00 + tax
Cancellation Policy: Cancellations will be accepted up to May 26, 2026. Refunds will not be issued for cancellations after May 26, 2026.
CECs = 12 (full program completion required). Partial CECs will not be issued.
Please also note that this is a pilot training, and the session may finish earlier. CACEA will assign the CECs based on the length of the session.

CSA F280-12 DHL/DHG Analysis: Whole-House and Room-by-Room Approach Pilot Training – Session #1
2026-05-12 11:00 - 2026-05-13 17:00 (America/Toronto) | Virtual via Zoom, Canada
REAs CAN STEP INTO THE HEAT PUMP GAME!
REAs delivering the EnerGuide Rating System (ERS) and other HOT2000 modelers will gain the ability to perform precise room-by-room heat loss and heat gain calculations for use in both the retrofit and new construction contexts. Using verified software, EAs and other HOT2000 modelers can provide key inputs to the sizing of heating and cooling equipment primarily based on data collected during home energy evaluations, with minimal additional information to be collected.
Upon completing this course, EAs and other HOT2000 modellers will be able to offer this service to homeowners and contractors, providing essential calculations that HVAC professionals can use to size heat pumps accurately. Please note: This course does not cover air distribution design and does not enable EAs and other HOT2000 modellers to select specific heat pumps or make direct sizing recommendations.
Instructor and CACEA member Liam Butters, Owner of Ecology Consulting, will guide the group through the whole-house and room-by-room F280 processes. At the end of the course, participants will:

Understand why heat loss and gain calculations are needed for existing and new homes.
Understand important definitions and concepts used in heat loss and gain calculations.
Understand the whole‐house and room-by-room heat loss and gain calculation principles and content.
Recognize the similarities and differences between the data used for HOT2000 energy simulation and CSA F280 whole‐house and room-by-room heat loss and gain calculations.
Familiarize with verified software that can use HOT2000 inputs through a case study.

REGISTRATION
CRITERIA FOR REAs:

A “Full” category CACEA member OR a non-CACEA member REA who completed D&E files and modelled 15 homes onsite tested under an NRCan program (ERS, EnergyStar, R2000 or NetZero – D&E; P&N) which is SO validated OR put forward by CACEA Full Member in good standing.
NON-MEMBER REQUIREMENTS: $1 million Errors and Omissions Insurance and a signed SO confirmation letter (annually). (USE THIS LETTER) Must upload the proof of coverage and letter to the registration form.

CRITERIA FOR OTHER HOT2000 MODELLERS:

1 full year of HOT2000 modelling.
$1 million Errors and Omissions Insurance. Must upload the proof of coverage to the registration form.

ADDITIONAL COURSE INFORMATION:

Participants will work through a case study and complete an independent exercise using the Volta SNAP tool.
Use a full-size monitor, preferably two. Working primarily from an iPad or laptop monitor is not ideal).
Ensure good connectivity and use a headset or quality external mic to reduce feedback or echoes.
Printing of certain course materials in advance is recommended – details will be provided closer to the event.

REGISTRATION FEES
CACEA Members: $25.00 + tax
Non-members: $25.00 + tax
Cancellation Policy: Cancellations will be accepted up to May 5, 2026. Refunds will not be issued for cancellations after May 5, 2026.
CECs = 12(full program completion required). Partial CECs will not be issued.
Please also note that this is a pilot training, and the session may finish earlier. CACEA will assign the CECs based on the length of the session.

CACEA Meet and Greet: Vancouver Island, BC
2026-05-08 17:00 - 20:00 (America/Vancouver)
Join CACEA members for a networking opportunity on May 8, 5:00pm – 8:00pm PT on Vancouver Island, BC (exact location to be confirmed soon).
This is a great chance to invite someone who isn’t yet a member to join us at the event. It’s a wonderful opportunity to show them what CACEA is all about and the benefits of being part of our community. Feel free to bring along a friend or colleague who might be interested in learning more!

CACEA Meet and Greet: Quebec City, QC
2026-05-05 18:00 - 19:00 (America/Toronto)
Join CACEA members for a networking opportunity on May 5, 6:00pm – 7:00pm ET in Quebec City, QC (exact location to be confirmed soon), in conjunction with the 2026 Home Building Week in Canada.
Whether you are registered for the event or happen to be in the area, members can connect over a drink and/or dinner (on your dime).
This is a great chance to invite someone who isn’t yet a member to join us at the event. It’s a wonderful opportunity to show them what CACEA is all about and the benefits of being part of our community. Feel free to bring along a friend or colleague who might be interested in learning more!
The first drink for CACEA members is on us – the rest is on you!

CACEA Meet and Greet: Calgary, AB
2026-04-28 19:00 - 20:30 (America/Edmonton)
Join CACEA members for a networking opportunity on April 28, 7:00pm – 8:30pm MT in Calgary, AB (exact location to be confirmed soon), in conjunction with the 2026 Alberta Energy Efficiency and Innovation Summit.
Whether you are registered for the event or happen to be in the area, members can connect over a drink and/or dinner (on your dime).
This is a great chance to invite someone who isn’t yet a member to join us at the event. It’s a wonderful opportunity to show them what CACEA is all about and the benefits of being part of our community. Feel free to bring along a friend or colleague who might be interested in learning more!
The first drink for CACEA members is on us – the rest is on you!
Want to take advantage of the member rate and other CACEA member benefits? Join CACEA now.

CACEA EA Council
2026-04-28 12:00 - 13:30 (America/Toronto) | Virtual via Zoom, Canada
Join us for an EA Council update session featuring:

A guided tour of our new website (launching in March) — explore enhanced features and navigation
A CEC requirements overview — stay current with continuing education updates
An advocacy initiatives update — learn about our latest advocacy efforts
BC updates — hear from Gilles Lesage about recent BC developments

Registration
CACEA Members: Free (CEC = 1.5)
Please note that this online event will take place in the Eastern Time Zone.
After you register with CACEA, please check your confirmation email and complete the second step of the registration in Zoom in order to receive your unique webinar link. Check your spam folder if you do not see it.
Want to take advantage of the free webinar? JOIN CACEA NOW!

NRCan’s Presentation on User-Defined Codes in the HOT2000 Code Editor
2026-04-24 12:00 - 13:00 (America/Toronto) | Virtual via Zoom, Canada
Join us to review the Code Editor and Code Library work, along with step-by-step instructions for creating user-defined codes.
Come prepared with your questions for NRCan related to this procedure.

CACEA Meet and Greet: Mono, ON
2026-04-19 17:00 - 19:00 (America/Toronto)
Join CACEA members for a networking opportunity before the start of BKC’s Spring Training Camp on Sunday, April 19, 2025, 5:00 pm – 7:00 pm ET at the Hockley Valley Resort, Mono, ON.
Whether you are registered for the event, or happen to be in the neighborhood, members can connect over a drink and/or dinner (on your dime) before the conference kicks off at 7:00pm ET.
This is a great chance to invite someone who isn’t yet a member to join us at the event. It’s a wonderful opportunity to show them what CACEA is all about and the benefits of being part of our community. Feel free to bring along a friend or colleague who might be interested in learning more!
The first drink for CACEA members is on us – the rest is on you!

CSA F280-12 DHL/DHG Analysis: Whole-House and Room-by-Room Approach (Pilot Training)
2026-04-13 11:00 - 2026-04-15 17:00 (America/Toronto) | Virtual via Zoom, Canada
This is a pilot training open to invited participants only (a registration code will be required during registration).
REAs CAN STEP INTO THE HEAT PUMP GAME!
REAs delivering the EnerGuide Rating System (ERS) and other HOT2000 modelers will gain the ability to perform precise room-by-room heat loss and heat gain calculations for use in both the retrofit and new construction contexts. Using verified software, EAs and other HOT2000 modelers can provide key inputs to the sizing of heating and cooling equipment primarily based on data collected during home energy evaluations, with minimal additional information to be collected.
Upon completing this course, EAs and other HOT2000 modellers will be able to offer this service to homeowners and contractors, providing essential calculations that HVAC professionals can use to size heat pumps accurately. Please note: This course does not cover air distribution design and does not enable EAs and other HOT2000 modellers to select specific heat pumps or make direct sizing recommendations.
Instructor and CACEA member Cooper Le MEA, Sr. Manager – Production and Operations at 4 Elements Integrated Design Ltd., will guide the group through the whole-house and room-by-room F280 processes. At the end of the course, participants will:

Understand why heat loss and gain calculations are needed for existing and new homes.
Understand important definitions and concepts used in heat loss and gain calculations.
Understand the whole‐house and room-by-room heat loss and gain calculation principles and content.
Recognize the similarities and differences between the data used for HOT2000 energy simulation and CSA F280 whole‐house and room-by-room heat loss and gain calculations.
Familiarize with verified software that can use HOT2000 inputs through a case study.

REGISTRATION
CRITERIA FOR REAs:

A “Full” category CACEA member OR a non-CACEA member REA who completed D&E files and modelled 15 homes onsite tested under an NRCan program (ERS, EnergyStar, R2000 or NetZero – D&E; P&N) which is SO validated OR put forward by CACEA Full Member in good standing.
NON-MEMBER REQUIREMENTS: $1 million Errors and Omissions Insurance and a signed SO confirmation letter (annually). (USE THIS LETTER ) Must upload the proof of coverage and letter to the registration form.

CRITERIA FOR OTHER HOT2000 MODELLERS:

1 full year of HOT2000 modelling.
$1 million Errors and Omissions Insurance. Must upload the proof of coverage to the registration form.

ADDITIONAL COURSE INFORMATION:

Participants will work through a case study and complete an independent exercise using the Volta SNAP tool.
Use a full-size monitor, preferably two. Working primarily from an iPad or laptop monitor is not ideal).
Ensure good connectivity and use a headset or quality external mic to reduce feedback or echoes.
Printing of certain course materials in advance is recommended – details will be provided closer to the event.

REGISTRATION FEES
CACEA Members: $25.00 + tax
Non-members: $25.00 + tax
Cancellation Policy: Cancellations will be accepted up to April 6, 2026. Refunds will not be issued for cancellations after April 6, 2026.
CECs = 12 (full program completion required). Partial CECs will not be issued.
NOTE: This course will be delivered in the Eastern time zone.
Successful participants will receive a Certificate of Completion, and CACEA members will be listed on CACEA’s website.

CACEA's Trivia Networking Event
2026-03-26 19:00 - 20:30 (America/Toronto) | Virtual via Zoom, Canada
CACEA’s TRIVIA CHALLENGE!
Forget meetings! It’s time to kick back, get to know one another, and have some fun!
Grab your favorite drink, make yourself comfortable, and join us for a thrilling event of trivia and fun. Whether you’re a trivia pro or not – everyone is welcome. It’s an evening full of brain-teasing questions and laughter, not to mention a great opportunity to connect with members in a relaxed and entertaining setting.
This event is open to CACEA members only at no charge.
We look forward to seeing you there!
Please note that this online event will take place in the Eastern Time Zone.

CSA F280-12 DHL/DHG Analysis Using a Room-by-Room Approach
2026-03-26 12:30 - 15:00 (America/Toronto) | Virtual via Zoom, Canada
This training is only for participants who have successfully completed the CSA Whole House training* and provides additional instruction on performing CSA F280 room-by-room heat loss and heat gain calculations using Volta Snap. Through two case studies, participants will learn how to apply these calculations for ductless heat pump selection and the design of air distribution systems in both existing and new homes.
CEC = 2.5. Successful CACEA members will be listed on our website.
*Registration is only open to those who successfully completed CACEA’s or the Canadian Greener Homes Community’s CSA F280 Whole-House training. CACEA will offer the full and updated CSA F280 Training using Volta SNAP in the Spring.

REGISTRATION FEES: $25 + tax
Cancellation Policy: Cancellations will be accepted up to March 19, 2026. A $10 administration fee will be applied. Refunds will not be issued for cancellations after March 19, 2026.

NOTE: This course will be delivered in the Eastern time zone.

After you register with CACEA, please check your confirmation email and complete the Zoom registration requirements in order to receive your unique meeting link. Check your spam folder if you do not see it.

Retrofit Refresh: Best Practices for Existing Home Audits
2026-03-24 11:30 - 2026-03-25 17:30 (America/Toronto) | Virtual via Zoom, Canada
This training program is designed to provide a deep understanding of the existing home audit process – providing practical, “boots on the ground” guidance and lessons learned for each building and administrative component; highlight potential modelling challenges; and offer information that supports the work of existing home EAs – contributing to confidence in the delivery of consistent EA services.
THE INSTRUCTOR:
Liam Butters, Owner, Ecology Consulting
Liam is a Professional Engineer and CEM and spent the last 15-years working in the industrial and construction sectors. He has extensive hands-on experience as an REA, and will share his deep understanding of the ERS, existing home evaluations, and residential HVAC design.
WHO SHOULD ATTEND:
• Newly licensed EAs
• REAs seeking a refresh of the existing home audit process
• EA candidates who have ideally passed NRCan’s Foundation and EA (House) exams
• Industry stakeholders who want to better understand the existing home audit process.
NOTE: This program assumes participants have a general understanding of building science, building processes and materials, and the Natural Resources Canada (NRCan) EnerGuide Rating System requirements, processes, HOT2000 modelling, and on-site practices, e.g., running a blower door.
TRAINING CONTENT:
DAY 1
• Data Collection • Foundations – Basements, Crawlspaces and Walkouts • Above Grade Walls and Headers • Exposed Floors • Windows and Doors
DAY 2
• Airtightness • Ventilation • Mechanicals – Heating and Cooling • Domestic Hot Water • Renewable Energy Systems • Additions • Reports • Administrative Considerations • Business and Communications
REGISTRATION FEES:
CACEA Members $295 + tax
CORPORATE CACEA Members $250.75 + tax (Discount code required; Contact info@cacea.ca if you did not receive a discount code)
Non-Members $450 + tax
Cancellation Policy: A $10 administrative fee will be issued for cancellations before March 17, 2026. No refunds for cancellations as of March 17, 2026.
CEC = 10 (full program completion required). Partial CEC will not be issued.

Recognized by the HPCN
This course is one of the required trainings for the Home Performance Contractor Network (HPCN) Energy Advisor sector.
NOTE: This course will be delivered in the Eastern time zone.

Successful participants will receive a Certificate of Completion.
After you register with CACEA, please check your confirmation email and complete the Zoom registration requirements in order to receive your unique meeting link. Check your spam folder if you do not see it.

Introduction to Modular and Panelization
2026-03-18 12:00 - 13:00 (America/Toronto) | Virtual via Zoom, Canada
Registration
CACEA Members: Free (CEC = 1)
Please note that this online event will take place in the Eastern Time Zone.
After you register with CACEA, please check your confirmation email and complete the second step of the registration in Zoom in order to receive your unique webinar link. Check your spam folder if you do not see it.
Want to take advantage of the free webinar? JOIN CACEA NOW!

Mechanical System Design and Sizing
2026-02-24 12:00 - 13:00 (America/Toronto) | Virtual via Zoom, Canada
Details coming soon.
This event is open to CACEA members only at no charge. (CEC = 1)
After you register with CACEA, please check your confirmation email and complete the second step of the registration in Zoom in order to receive your unique webinar link. Check your spam folder if you do not see it.

CACEA Annual General Meeting and Town Hall
2026-02-23 12:00 - 15:00 (America/Toronto) | Virtual via Zoom, Canada
his is a key meeting for all CACEA members and supporters. During the Annual General Meeting (AGM), members (Full and Junior categories) will be asked to approve the 2025 AGM minutes, the 2025 year-end financial statements, and elect the CACEA Board of Directors.
All documents, along with the agenda, will be shared with members soon.
Following the formal portion of the event, CACEA will host a presentation led by a guest speaker, followed by an interactive and open Town Hall discussion.
Cannot Attend the AGM But Want To Be Part of the Voting?
CACEA voting members who can’t attend the AGM can complete a Proxy Form which appoints a member (Full or Junior category) to vote on their behalf. Please forward your completed form to info@cacea.ca by February 20, 2025 by 5:00pm Eastern Time Zone.
While this will delivered as a webinar to allow us to track attendance, participants will have the opportunity to participate in the meeting and ask questions.
Registration:
CACEA Members: Free (CEC = 3)
Non-members: $25 plus tax
After you register with CACEA, please check your confirmation email and complete the Zoom registration requirements in order to receive your unique webinar link. Check your spam folder if you do not see it.

Retrofit Refresh: Best Practices for Existing Home Audits
2026-01-19 11:30 - 2026-01-20 17:30 (America/Toronto) | Virtual via Zoom, Canada
This training program is designed to provide a deep understanding of the existing home audit process – providing practical, “boots on the ground” guidance and lessons learned for each building and administrative component; highlight potential modelling challenges; and offer information that supports the work of existing home EAs – contributing to confidence in the delivery of consistent EA services.

Residential Duct Air Flow Measurement: Assessing the impact of air flow on ASHP sizing
2026-01-15 12:00 - 18:00 (America/Toronto) | Virtual via Zoom, Canada
Duct capacity is often a limiting factor in sizing retrofit heat pumps, and contractors often size heat pumps based on the existing air conditioner, resulting in under-sized equipment. A simple 15-minute test can provide definitive air flow capacity of a duct system, contributing to a proper sized heat pump and avoiding poor system performance—such as noise problems due to restrictive ductwork. Energy Advisors (EA) can easily add this procedure to the scope of an Energy Evaluation.
This training will instruct EAs on how to evaluate the airflow capacity of duct systems in homes where the distribution system is not being changed and the primary retrofit measure is the replacement of heating and cooling equipment. In conjunction with other considerations—such as the CSA F280-12 Heat Loss/Heat Gain value—this is a preliminary assessment to provide the homeowner and their HVAC Contractor with data that will help the contractor select the largest ASHP based on existing ductwork. Please note: This course does not enable EAs and other HOT2000 modelers to select specific heat pumps or make direct sizing recommendations. The Contractor is ultimately responsible for equipment selection.
Instructor and CACEA member Mark Rosen MEA, Director, Building Science, Building Knowledge Canada and a well-known professional architect, trainer, and consultant who is passionate about buildings that perform exceptionally well.

Unlocking Efficiency: Drain Water Heat Recovery for Multi-Unit Residential Buildings
2025-12-04 12:00 - 13:30 UTC | Virtual via Zoom, Canada
Marc Fontaine from EcoInnovation Technologies will provide a comprehensive overview of Drain Water Heat Recovery (DWHR) systems. Learn more about:

the construction of DWHR, working principles, and history of adoption
different installation configurations, performance and efficiency, and
how DWHR integrates with various water heater and building types, including multi-unit residential buildings.

The session also will provide guidance on selecting the right unit, practical installation examples, and the use of energy recovery calculation tools.

This event is open to CACEA members only at no charge. (CEC = 1.5)
Please note that this online event will take place in the Eastern Time Zone.
After you register with CACEA, please check your confirmation email and complete the second step of the registration in Zoom in order to receive your unique webinar link. Check your spam folder if you do not see it.
Want to take advantage of the free webinar? JOIN CACEA NOW!

CACEA Meet and Greet: Winnipeg, MB
2025-12-03 17:30 - 19:30 UTC
Join CACEA Executive Director Cindy Gareau and other members for a networking opportunity on December 3, 2025, 5:30pm – 7:30pm CT in Winnipeg, MB (exact location to be confirmed closer to the date).
This is an ideal opportunity for members and industry partners to connect, share ideas, and strengthen relationships—while also enjoying a drink or dinner (at your own expense).
It’s also a perfect chance to invite someone who isn’t yet a member to experience what CACEA is all about. Bring along a friend or colleague who may be interested in learning more about the value of membership and the benefits of being part of our community.
The first drink for CACEA members is on us – the rest is on you!

Want to take advantage of the member rate and other CACEA member benefits? Join CACEA now.

CACEA Meet and Greet: Regina, SK
2025-11-11 17:30 - 19:30 UTC
Join CACEA Executive Director Cindy Gareau and other members for a networking opportunity on Tuesday, November 11, 2025, 5:30pm – 7:30pm CT in Regina, SK (exact location to be confirmed closer to the date).
This is an ideal opportunity for members and industry partners to connect, share ideas, and strengthen relationships—while also enjoying a drink or dinner (at your own expense).
It’s also a perfect chance to invite someone who isn’t yet a member to experience what CACEA is all about. Bring along a friend or colleague who may be interested in learning more about the value of membership and the benefits of being part of our community.
The first drink for CACEA members is on us – the rest is on you!
Want to take advantage of the member rate and other CACEA member benefits? Join CACEA now.

Update on NRCan's National Approach to Home Labelling
2025-10-30 12:00 - 13:30 UTC | Virtual via Zoom, Canada
Join Victoria Charmet, Manager, Home Energy and Adaptation Labelling Task Force, Office of Energy Efficiency, Natural Resources Canada for an update on NRCan’s National Approach to Home Labelling.
Details of the presentation to follow.
This event is open to CACEA members only at no charge. (CEC = 1.5)
Please note that this online event will take place in the Eastern Time Zone.
After you register with CACEA, please check your confirmation email and complete the second step of the registration in Zoom in order to receive your unique webinar link. Check your spam folder if you do not see it.
Want to take advantage of the free* webinar? JOIN CACEA NOW!
*CACEA Members: you must be a member in good standing to qualify for this fee
